Assemble the cubby as shown, then position inside the cabinet. The top face of the bottom will be flush with the top face of the lower stretcher.Ĭut the pieces for the cubby. Secure the bottom to the lower stretcher and 2×2 frame pieces using glue and 1-1/4″ pocket hole screws. Set the pocket hole jig for 3/4″ material and drill pocket holes in all four edges. Secure to the legs as shown using glue and 2-1/2″ pocket hole screws.Ĭut the piece for the bottom. Set the pocket hole jig for 1-1/2″ material and drill pocket holes in each end. Secure the panel assembly to the legs using glue and the appropriate pocket hole screw for the material – 1-1/4″ pocket hole screws through the 3/4″ material, and 2-1/2″ pocket hole screws through the 1-1/2″ material.Ĭut the piece for the lower stretcher. Orient the pocket holes on the 1×2 piece so they face up and will be hidden by the top. The back face of the panel will be flush with the back face of the 2×2 frame piece. Secure the frame pieces to the panel using glue and 1-1/4″ pocket hole screws. Reset the pocket hole jig for 3/4″ material and drill pocket holes in each end of the 1×2 frame piece as well as all four edges of the panel. Secure the panel assembly to the legs using glue and the appropriate pocket hole screw for the material – 1-1/4″ pocket hole screws through the 3/4″ material, and 2-1/2″ pocket hole screws through the 1-1/2″ material.Ĭut the pieces for the back frame pieces and back panel. Set the pocket hole jig for 1-1/2″ material and drill pocket holes in each end of the 2×2 piece. Reset the pocket hole jig for 3/4″ material and drill pocket holes in each end of the 1×2 frame pieces as well as all four edges of the panel. With the pocket hole jig set for 1-1/2″ material, drill pocket holes in each end of the 2×2 pieces. 2 – 3/4″ plywood at 2-3/8″ x 15-3/4″ – Drawer Front & BackĬlick on the drawings for a larger view! Step OneĮdge banding will be applied to the exposed edges of the plywood prior to assembly.Ĭut the pieces for the legs, side frames, and side panels.2 – 3/4″ plywood at 10″ x 16″ – Bottom, Upper Shelf.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |